SB 715 (self-leveling concrete floor paint)

Used:Topcoat for cement products,chemical plant,power plant,food factory,lab and hospital…

Characteristics:Excellent self-liverling,hight build coating without pinhole,500-1500µ pre coat.

Technical data

• Color:color list.

• Density(kg/l):1.45-1.50kg/l

• Viscocity at 25^oC 3500-6000cps

• Non-volatile content:Above 95%↑by weight(mixture).

• Covergare:1kg/1m²(1000µ pre coat)

• Wet film thickness500µ,dry film thickness 475µ.

• Dry time (at 25^oC):Touch dry 6hrs,dry hard 18 hrs full dry 7 days.

• Mixture ratio:base:hardenner=4:1(by weight).

• Pot life:45 min (minture at 25^oC).

• Thinner:Only clearing tools.

Physical properties:

• Hardness:H

• Abrasion test(g):0.5

• Impact (Φ12.5mmx500gx50cm):>50cm

Chemical properties:(Laboatory tests ,full dry after 7 days)

• Acid resistent(H₂SO₄) 5%: No change

• Acid resistent(HNO₃) 5%: No change

• Acid resistent(CH₃COOH) 5%: Yellowish

• Acid resistent(HCL) 5%: No change

• Alkaly resistent(NaOH) 5% No change

• Salt resistent(NaCl) 5% No change.

• Gasoline:Nochange

• Motor oil :No change.

• Organic solvent(Xylene):No change

Application method:Special tools.

Note:

• Mix base with hardenner according to mixing ratio and stir thoroughly.

• Adhered moisture,grease,diry ,rustand corrosive salts on subtrate must be cleaned thoroughly.

• Avoid applying the paint in rainy weather or humidty above 85%RH, particurlarly , a west surface must be thoroughly dried.

• All equiqments must be cleaned immediately after used.

• Start applies after the surface of concrete wall or concrete products dry thoroughly .

• When overcoating interval is exceeded,paint surface must roughened to insure adhension.

• Environment construction must be airy,keep away frie.When rolling pait must to wear safety glass,instruments of labor protection.

Package:Base 19 kg/dr,hardenner 4.75 kg/can.